Frequently Asked Questions

We are located in beautiful San Marcos, California.

We’ve been building truck campers since 2021!

Yes, all of our campers are hand made right here in southern California.

At this time we partner with Viato Equipment for camper interiors and accessories. Check them out at www.viatoequipment.com

No, at this time we are not open for other custom projects.

Our Bruin camper start at about 300lbs for a midsize truck and the Tenfold starts at about 275lbs for a midsize truck. Add ons like windows and fans, as well as larger truck beds, can increase the weight.

All campers come in charcoal black. The Bruin comes in charcoal black with white pop-up hardwalls, while the Tenfold comes in charcoal black with desert tan pop-up tent walls.

It typically takes less than a minute to set up or take down the camper. You simply walk around the truck, unlatching the four locks, and then push up on the handles at the rear. To close, you’ll just pull the top down, then relatch the four exterior locks, and you’re ready to hit the trail!

Yes. To add media follow these steps: A camper shell really converts your truck bed into a livable space. While a roof top tent merely gives you a place to lay down, a camper shell gives you the ability to stand up, and store your belongings, in the same place you’re sleeping in is game changing. No need to get out of the truck to get ready for your adventure!

Hard side walls can withstand harsh weather like wind, snow, and rain, much better than canvas side walls. That means you and your family stay comfortable and warm. The walls are made of aluminum composite, which is naturally water resistant, lightweight and durable. Our side walls will stand up to years of abuse, where canvas wears out over time and needs to be replaced.

Yes! Oru campers can be built to fit any truck bed. The pop up tent portion is universale at about 5’ x 9’, then the base is custom built to your truck bed dimensions.

The height of the camper when closed is about 8” from the top of your truck cab. If you choose the Maxxair Fan add on, it will add another 5″ of height above the roof. Whether it will fit in your garage really depends on your truck model, lift, bed rail height, etc.

The camper side walls are optimized to fit the queen sized bed platform. On most mid-sized trucks, this means the walls are vertical. However, on most full-sized trucks the sidewalls are slightly angled in. It’s a custom fit to each truck, and depends on the width of your truck bed.

Maximizing space! While wedge-style tents are low profile and offer a more traditional camping tent feel, they offer less interior space than the straight-wall style pop-up. Making it more difficult for two people to share the same space. Full pop-up sides make it easy for one person to sit up in the loft, while another is prepping for the day down below.

When popped up, the interior height is about 6’6”, plus or minus a couple of inches depending on the height of the bed rails

The sleeping platform is 60” x 80”, or a queen sized bed, and can hold up to 500lbs point load.

Yes! The sleeping platform is removable. When you want access to your truck bed, simply fold your bed and bedding up and slide the panel back giving you tons of vertical space!

Yes, you can leave your mattress and bedding in place when the camper is closed! Our camper is designed for ease of use, and the ability to get right in bed with little set up time is great after a long day on the trail.

Yes, there is space at the end of the sleeping platform, so you can get in and out of bed, and stand up, inside the camper while the sleeping platform is down.

The Adventurer and Pro models come standard with a 4” memory foam mattress. Or, we can add one to your Weekender for an extra $330.

The tent portion of the camper is universale size at about 5’ x 9’. If your truck bed is 6’ long, the tent portion will hang over the cab about 3’.

Very! The gas struts on the side, paired with the exterior handles, make it easy for one person to open or close the top by themselves. It only takes a few seconds to unlock the exterior latches and pop the top.

Though truck beds themselves are not water tight or dust proof, we try our hardest to make our campers as water and dust proof as possible.

Yes. We offer crossbars as an add on.

The roof is made of a polymer honeycomb, and can support up to 200lbs.

The strength of aluminum is comparable to that of steel, but weighs 66% less. Paired with our meticulously engineered shell design, our aluminum campers are built to be nearly indestructible while keeping the weight down to work with any truck payload.

Yes, all side doors and windows have locks that use a single key.

The camper attaches to the truck with heavy duty mounting clamps. They clamp the base of the camper to the truck bed rails, and are easily removable. We can also mount them into the T-track (common for Tacomas).

Yes, our campers are easily removable by taking off the mounting clamps and lifting off your bed rails.

Yes, we will have accessories available soon!

No, you cannot drive with the top popped open. The top must be down, and all four exterior latches must be secured before driving.

Our Bruin campers start at $8,499 and our Tenfold campers start at $5,999.

First, you’ll choose your package options, camper add ons, and pay your $500 nonrefundable deposit. After that, we will send you the full invoice. Once you’ve paid the invoice, we will begin working on your camper! The invoice must be paid in full before the estimated 8-12 week build time begins.

Not yet! We are working hard to offer more locations across the country.

Yes, you can sell your nonrefundable deposit spot to someone else if you are no longer wanting to purchase your camper.

Yes! You can visit our warehouse in San Marcos, California to check out our campers in person. If you’re not in California, we may be able to find a previous customer closer to your location to show you their camper.

You can see our full warranty statement here: www.orudesignsusa.com/warranty

Financing is available through our partner at www.lightstream.com

Yes, if purchased with us in California you will need to pay California sales tax.

You can see our full return policy here: www.orudesignsusa.com/return-policy

No, your installation is included with your purchase.

When your camper is complete, we will contact you and you can come pick it up and have it installed at our location in San Marcos, California.

Yes! We do offer shipping. Pricing will vary depending on location.

Our current lead time is estimated to be 8-12 weeks from the day your camper invoice is paid in full.

Your camper will be installed by our team on site when you come to pick it up.

Installation typically takes about one hour.